Designed specifically to withstand extreme conditions, this permanent protective coating has advanced High Heat Resistant and Super Chemical Resistant properties to protect your wheels and brake calipers from damaging brake dust and fallout, not only will they be protected by 9H Hardness but the Hydrophobic and Anti-Graffiti properties of this advanced coating ensure they stay cleaner for longer, and are easier to clean!
Protection with Nano Ceramic Protect® Hard 9H Permanent Coatings √ Anti-Graffiti & Anti Fingerprint √ Super Chemical √ Resistance UV √ Resistance Thermal √ Resistance (up to 1500°C) √ High Gloss Finishing √ The surface on the wheel or rim gets so smooth that brake dust and other containments will not bond!
Nano Ceramic Protect® Leather makes the leather upholstery more resistant (against the UV radiation and other harmful external factors) and nourished and also brings a rich colour to it. The ceramic coating, which crystallizes after an application, causes gain of a clean and maximal protected upholstery.
Methods of application: manually with sponge applicator or with NCP SATA Spraying System. Before application we suggest to clean leather with NCP Interior Cleaner – Ready to use or NCP APC – concentrate – products from maintenance series.
The quick reaction time is an immediate action. Good visibility means a situation control and better safety on a route. The clean car glass significantly assures both of them. Each, even the smallest nuisance which causes worse visibility brings for driver and other road users a risk of an accident. In order to minimalize that risk there is need of car glasses proper protection.
Use of Nano Ceramic Protect Glass „invisible wiper” gives:
• Car glasses conservation,
• Creation of a ceramic protection covering based on a nanotechnology,
• Better visibility through glasses,
• Perfect hydrophobicity (water moleculars repulsion),
• Resistance on low temperatures, ease to clean frozen glasses,
• High durability on a chemicals influence,
• Better resistance against mechanical damages,
• Ease of keeping glasses clean (impurities do not stick to the covering),
• Protection from environmental factors influence,
• Very good visibility even in a difficult atmosphere conditions.
Nano Ceramic Protect Glass assures density and durability of covering, which protects the glass even up to 3 months.
Set contains:
√ 30 ml Nano Ceramic Protect® Glass
√ sponge applicator
√ microfiber 30×30 cm
The product is available for sale separately: the capacity – 500 ml.
Nano Ceramic Protect® Fabric is the product, which makes keeping factory-made features of cabrio material roof possible. Improper conservation or its lack has a negative influence on a bad appearance and fading of a roof, but above all causes its grime and damaging of inside structure of a material. As a result it brings an expensive repair of a durable roof damages.
The regular use of the Nano Ceramic Protect® Fabric guarantees better resistance on a humidity and counteracts against repeated grime of roof.
Directions: Apply for clean, dry surface. Shake well before use. Spray from a distance 15-20 cm. Spray cross 2 layers. Touch dry in: 30 minutes. Time of full cure: 6 hours.Nano Ceramic Protect® CutX leaves a long lasting finish which can be applied to all types of new and used vehicles paintwork. It will cut back faded and oxidised paintwork and also removes minor swirls, holograms scratches, hazing and the greasy residue caused by inferior polishes. Tar and fly stains can also be removed. Product does not dirty plastics, seals and leaves no streaks.
Directions: Shake well before use (about 2 minutes). Apply a thin layer with sponge applicator or mechanically on all painted surfaces, chrome, lampshades. Leave for 30-40 minutes to dry. Then polish with a microfiber cloth or mechanically with polishing pad.
Nano Ceramic Protect® Shampoo – Super Concentrate
Highly foaming concentrate for cleaning cars, derived from vegetable oils, completely biodegradable. Removes dirt from all types of surfaces: paint, chrome, glass, gum, vinyl, plastic, etc. Leaves a protective coating and high gloss. Very efficient product with a special formula and fresh fragrance. Product with neutral pH.
Directions: Shake well before use. Rinse off excess grime with water. Add 50 ml of shampoo to a bucket of water (concentrate 1:200). Apply with a sponge. Rinse off with clean water. For best results dry with a microfiber cloth.
Nano Ceramic Protect® Quick Detailer Waterless Wash and Wax in less then 15 minutes.
Product created to clean paint parts, glass and chrome. Quickly and easily remove all kinds of dirt. It does not leave streaks and scratch the paint. Cleans and polishes your vehicle without the need of washing before hand and water.
Directions: Shake well before use. Spray directly over the surface and wipe with a clean microfibre cloth to remove any dirt and muck. Then using a clean dry microfiber, buff to leave a clean, smear free finish.
Nano Ceramic Protect® Tar & Glue Remover - product to remove tar, grease, asphalt, resin, glue from the foil etc. Easily cleans hard to remove dirtiness from the paint, floors and other surfaces. Product evaporates slowly making a long drying time, which helps the work. It does not leave stains, degrease the surface leaving it clean and dry.
Directions: Shake well before use. Spray onto effected area, leave for 1-2 minutes. Wipe off with a microfiber, and rinse area with clean water to remove any residue. Leaves no oily residue.
Nano Ceramic Protect® APC - concentrate - Universal cleaner for various applications. Perfect for cleaning leather, material upholstery, carpets, plastics and for use in industry and household. Safe to use, efficient and effective, with a pleasant fragrance.
Directions: Shake well before use. Depending on the type of soil keep the right dilution (minimum dilution – 1 liter liquid per 50 liters of water, maximum dilution – 1 liter of 2 liters of water). Before use, test the product on a small surface. Spray with a trigger directly on the surface to be cleaned or applied manually using a microfiber cloth. Clean the dirty surface in a circular motion to achieve the desired effect.
Nano Ceramic Protect® Upholstery Cleaner Aerosol is a foaming aerosol cleaner. It contains a carefully balanced blend of surface active ingredients & deodorising agents to clean quickly & effectively. The easy to use spray can be used to remove stains & grime from fabric, upholstery, carpets, roof linings, vinyl, soft tops & plastics. It is ideal for use as a general cleaner in cars & caravans but can also be used all around the home.
Directions: Shake well before use. Spray from a distance 15-20 cm. Wait 10-20 seconds. Clean the dirty surface in a circular motion with a microfiber cloth to achieve the desired effect.
Nano Ceramic Protect® Interior Cleaner - Ready to use universal cleaner for various applications. Perfect for cleaning leather, material upholstery, carpets, plastics and for use in industry and household. Safe to use, efficient and effective, with a pleasant fragrance.
Directions: Shake well before use. Before use, test the product on a small surface. Spray with a trigger directly on the surface to be cleaned or applied manually using a microfiber cloth. Clean the dirty surface in a circular motion to achieve the desired effect.
Nano Ceramic Protect® Glass Cleaner is a product, thanks to which car windows are perfectly protected and the driver gains a non-comparable improvement of visibility both during a day and night. Nanomoleculars, included in the Nano Ceramic Protect® Glass preparation, form on a glass’s surface durable, ceramic protection covering. That layer causes a repulsion of water molecular (the hydrophobicity effect), causing their immediate and automatic from a car glass during driving. Thanks to this, the need of car wipers use is eliminated during rain. The product has a high resistance on a low temperatures and makes easier frozen glasses cleaning during winter.
Directions: Shake well before use. Before use, test the product on a small surface. Spray with a trigger directly on the surface to be cleaned or applied manually using a microfiber cloth. Clean the dirty surface in a circular motion to achieve the desired effect.