To start car washing safely, we will have to equip ourselves with a few necessary “helpers”:
Optionally, Nano Ceramic Protect® APC Concentrate and detailing brushes are recommended.
The whole process of safe car washing should be carried out in specially adapted and shaded places. Washing the car in full sun will cause the chemicals used to dry.
The first stage of safe car washing is getting rid of the volatile sediment. It is enough to rinse the car with water under pressure, thanks to which we will get rid of the majority of volatile sediments (sand, pollen, etc.)
The next stage of safe car washing should be cleaning hard to reach places.
To clean hard-to-reach areas, simply crush the Nano Ceramic Protect® APC Concentrate in a 1: 3 ratio, where 1 is Nano Ceramic Protect® APC Concentrate and 3 is water.
Spray the hard-to-reach places with the diluted Nano Ceramic Protect® APC Concentrate and then clean them with a brush. Then rinse the excess product with water under pressure.
The third stage is washing the car with a sponge and shampoo with a neutral Ph. By using a neutral Ph-shampoo, we are sure that it will not negatively affect any car-paint coating.
Let’s prepare two buckets with dirt separators. One bucket is filled with water with shampoo, the other one with only water. The use of separators will allow to keep the sand particles in the bucket.
When starting the correct washing, dip the sponge from the bucket with water and then make movements along the car’s body. It is a mistake to use circular movements while washing the car. In order to safely wash the car in accordance with the “art”, we must avoid circular movements on the body of our vehicle.
After washing the element, dip the sponge in a bucket of clean water and shake it thoroughly. Then we repeat the whole process, again submerging the sponge in water with shampoo.
After thoroughly washing the vehicle, it should be dried. If we left our vehicle to self-dry, a white precipitate would appear on its bodywork. It is popularly called “stone”, being in the water and staying on the surface after evaporation.
If our vehicle is equipped with a Nano Ceramic Protect® ceramic coating, a leaf blower is ideal for drying it. High surface smoothness ensures excellent water discharge at the slightest blast. This effect is visible in the following video, when approaching the roof of the car. Rotors from the recording drone caused the roof to dry completely!
Of course, you should not forget about cleaning the wheels, this process is described in detail in this article.
To enjoy the perfectly clean car for as long as possible, it is necessary to preserve the varnish coat. This treatment will allow us to easier cleaning the vehicle in the future, and by the way will provide the effect of “repelling” dirt.
The basic protection that should be used after each safe car wash is Nano Ceramic Protect® Quick Detailer. Its regular use increases the gloss of the varnish and reduces its tendency to attract dirt.
The best car-paint protection, however, is the Nano Ceramic Protect® Hard 9H ceramic protective coating. Let’s take a look at the video below showing the ceramic protected Porsche 997. Let’s find out that safe car washing is possible.
As we can see, keeping a ceramic protected car in a clean condition is limited to rinsing the sludge with water under pressure and drying the vehicle, for example with the aid of a leaf blower. This type of activity does not require us to contact the car directly. Thanks to this solution, our car is much less exposed to scratches.
The Nano Ceramic Protect® Hard 9H ceramic protective coating is easy to clean and does not require additional wiping. The non-contact cleaning of a car covered with a Nano Ceramic Protect® Hard 9H ceramic coating does not require any additional chemicals – just water. It is an ecological solution that saves time and money. A five-minute “water-air” treatment will provide us with a perfect cleanness of the paint without streaks and contaminants, so common with “classic” washing.